Draco tera
112
2017-09-06
Java-Tool
To create and configure a User Group, proceed as follows:
1. Select the tab
User Groups
in the menu
Definition > Groups
of the
task area.
2. Press the button
New Group
.
A popup window will be opened.
3. Select
Create a standard Group
in the popup window and press
Ok
.
4. Enter a group name into the field
Name
.
5. Press the button
Apply
.
The group is created now.
To assign a user to a group, proceed as follows:
1. Select the tab
User Groups
in the menu
Definition > Groups
of the
task area.
2. Select the User Group to be assgined with a user.
3. Select a user in the list
CPU/Group available
that you want to
assigne to the User Group.
4. Move the highlighted user to the list
CPU/Group assigned
.
5. Press the button
Okay
.
The user is assigned to the User Group now.
Pos: 77 /806-IHSE/Konfiguration/480_Extender-Einstellungen/480-xx @ 7\mod_1309938366618_6.doc @ 53197 @ 23 @ 1
5.6
Extender Settings
All extender units are managed in this menu. This includes the creation of
new extender units and the deletion of existing extender units.
The extender unit describes the connection of an physical extender to the
matrix. Every extender board with a direct cable connection to the matrix
is recognized as an extender unit. Dual-Head KVM extenders will be
recognized as two independent extender units.
KVM Extenders automatically create extender units inside the matrix.
