Draco tera
238
2017-09-06
This declaration certifies the conformity to the specified directives but
contains no assurance of properties. The safety instructions and
installation guidelines noted in this manual shall be considered in detail.
Compliance with the specifications for cable lengths and types is
mandatory.
11.2 North American Regulatory Compliance
This equipment has been found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at his own
expense.
Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Shielded cables must be used with this equipment to maintain compliance
with radio frequency energy emission regulations and ensure a suitably
high level of immunity to electromagnetic disturbances.
All power supplies are certified to the relevant major international safety
standards.
Pos: 175 /806-IHSE/Zertifikate/480-xx_Produktsicherheit @ 15\mod_1446727181349_6.doc @ 165023 @ 2 @ 1
11.3 Product Safety
The product safety of the devices is proven by the compliance to the
following standards:
IEC
60950-1A1:2010
EN
60950-1/A12:2011/A1:2010/A11:2009
UL
60950-1-2007
CAN/CSA-C22.2
60950-1-07
The compliance is verified and confirmed by TÜV Süd, Germany.
Pos: 176 /806-IHSE/Zertifikate/ATB_WEEE @ 5\mod_1278579673292_6.doc
@ 42704 @ 2 @ 1
