Configuration
2017-09-06
71
5.2.3 Control via Serial Interface
The Draco tera operating system offers various functions for an operation
via serial interface. There are telegrams for Switching single or all
connections available, both unidirectional and bidirectional. In addition,
there are telegrams for an overall definition of the total switching status
and for saving and loading such switching states.
The Draco tera optionally provides an echo of all affected switching
operations via serial interface or network interface. This aids continuous
tracking of a matrix configuration and enables your own applications to be
updated.
As an additional application you can parallely switch matrix clones as
synchronized matrices (
Stacking
) via serial network interface.
Pos: 57 /806-IHSE/Konfiguration/480_Zuordnung/480-xx/Zuordnung @ 7\mod_1309937797383_6.doc @ 52976 @ 2 @ 1
5.3
Assignment
The Draco tera offers the option of a console specific or a CPU specific
assignment.
Assign virtual CPUs to real CPUs.
Assign real consoles to virtual consoles.
Pos: 58 /806-IHSE/Konfiguration/480_Zuordnung/480-xx/Virtuelle CPU @ 7\mod_1309937891305_6.doc @ 53012 @ 3 @ 1
5.3.1 Virtual CPU
You can assign virtual to real CPUs in this menu.
With this function the effort of switching several consoles to the same CPU
can be reduced. If several consoles are connected to a virtual CPU that is
assigned to a real CPU, you only have to change the real CPU once and
all consoles will receive the video signal of the new CPU.
It is possible to assign either one or several real CPUs to a virtual CPU.
You have the following options to access the menu:
