Draco tera
42
2014-04-15
Filter options are not valid within the locally stored log files.
Recording Function
All messages shown in the Syslog are equipped with various recording
functions.
In order to store messages shown in the Syslog (filtered or unfiltered),
press the
Save trace
button. The messages will be stored in a .txt
file.
In order to remove messages shown in the Syslog, press the
Clear
trace
button.
In order to stop recording messages, press the
Pause
button. In order
to continue press the button again.
Pos: 37 /806-IHSE/Beschreibung/SNMP/480-xx @ 8\mod_1352794857131_6.doc @ 69602 @ 2 @ 1
3.10 SNMP
The SNMP function allows all function-critical and safety-critical elements
of the matrix to be monitored and queried. This function complies with the
RFC 1157 conformal standard.
When using SNMP monitoring, it is recommended that a dedicated
network is used to maintain continuous access.
You have the following options to configure the SNMP monitoring:
