Draco vario
DisplayPort
1.1
Safety instructions
11
Connection
Check the device and the power supply units for visible damage before connecting it.
Only connect the device if the device and the ports are not damaged.
Only use power supply units originally supplied with the product or manufacturer-approved
replacements.
Only use power supply units without any visible damage at the chassis or the cable.
Connect all power supply units to grounded outlets.
Ensure that the ground connection is maintained from the outlet socket through to the power supply's
AC power input.
Only connect the device to KVM devices using the interconnect cable - not to other devices, particularly
not to telecommunications or network devices
Disconnect the Device from the Circuit
NOTICE
The cable plugs on the device side can contain a lock. In the event of a necessary quick and complete
disconnection from external electric circuits:
Remove all corresponding cable plugs from the socket,
Or set the power switch of the power outlets (if available) to the “Off” position.
