Misprints, errors and technical changes reserved
Misprints, errors and technical changes reserved
USING THE ON SCREEN MENU
Use the monitor and keyboard to use the main menu.
To access the main menu:
1. Make sure the extenders, the monitors and the computer are switched on.
2. Press the
ALT+GR
key on your keyboard quickly fi ve times.
The
main menu
appears with an overview of the sub-menus.
3 To open a sub-menu press the applicable key.
Main Menu
Main meu Short Cuts :
S Status Overview
Menu Status /current status
U Update Flash FW
Firmware Updates
F Features Overview
Settings Features
D DDC Option
DDC Option Fix settings 1020 x 1080
L Local Settings
Settings Local
R Remote Settings
Settings Remote
A About Overview
Overview Upgrades Upgrades
Q Exit
Exit
SYSTEM STATUS
Single
Dual
In the status overview menu the current status of the extender connection is displayed. It
provides information on the connection itself as well as resolution of the video channel, and USB-
status.
The enabled options and the current fi rmware-version is displayed in the left top corner.
Link status shows whether there is a physical connection available.
Connected
indicates if kvm
data is currently able to be transmitted.
Video and USB
show if data is currently being transmitted.
VIEWING THE FIRMWARE VERSION
Under „A“ - About the currently installed fi rmware version of the remote (CON) and local
(CPU) Extender is displayed (e.g. ‚4267‘)
FEATURES MENÜ
Features Menu
P
Point to Point Mode
Enabled/Disabled
(Point to Point Point to Point excludes itself
with Matrix mode
M
Matrix Switching Mode
Disabled/Enabled
D
Freeze last Image
(Disabled)Disabled/Enabled
E
USB Emulation Mode
(Disabled ) Disabled/Enabled
S
USB Save Feature
(mass storage usable) Disabled/Enabled
O
Power Redundance Alert
Alert System
C
Diagnosis
Diagnosis menu
U
Unlock Features
Unlock Features
I
IP Management
IP Management
POINT TO POINT
You can switch the Point to Point mode on and off by pressing the „P“ key
ATTENTION - if the point to point mode is activated, the switching mode cannot be activated
MATRIX SWITCHING MODE
By pressing the „M“ button you can switch the Matrix Switching Mode off and on
KVM-TEC
Gewerbepark
Mitterfeld 1 A
2523 Tattendorf
Austria
www.kvm-tec.com
IHSE USA LLC
1 Corp.Dr.Suite
Cranburry NJ 08512
USA
www.ihseusa.com
IHSE GMBH Asia
158Kallang
Way,#07-13A
349245 Singapore
www.ihse.com
IHSE China Co.,Ltd
Room 814
Building 3, Kezhu Road
Guangzhou PRC
www.ihse.com.cn
IHSE GmbH
Benzstr.1
88094 Oberteuringen
Germany
www.ihse.com
