IDL707
(WIFI)
i.h.t Smart Lock Installation Instruction
Please read this instruction carefully before installation
Installation
Safety Cautions
•
It is recommended to look for a professionals to install.
•
Please note that the connection power line can't be pressed or folded during installation.
•
Before the installation, the lock must be positioned according to the door opening
direction. The handle can't be adjusted after lock body is installed .
•
While installing, the door must be opened until the installation is completed. After the
installation is completed, test whether the front and back handle can unlock/lock using the
fingerprint, smart card, password (1234567890#) , APP and key.
•
If it does not work properly, please check if there is an improper installation, if the power
cord is loose or the batteries are inserted incorrectly.
•
Ensure no liquids are near the lock during installation.
Installation Overview
1.
Front Panel
2.
Connection Column
3.
Square Steel
4.
Lock Body
5.
Connection power Line
6.
Back Panel
7.
Battery Cover
8.
Connection Column Screws
9.
Back Handle
10. Connection Column Screws
11. Latch-bolt
12. Dead-bolt
13. Lock Body Screws
14. Connection Column
15. Key Hole
16. Emergency Power Port
17. Front Handle
18. 'SET' Button
Features
5-Way Access Methods
Fingerprint, Password, Card, APP, Back-up Key
Battery Type / Life
4
×
AA Battery / 1 Year
Storage Capacity
100 (Passwords, Fingerprints & Cards)
Identity Time
0.3 Seconds
Low Voltage Warning
≤4.6V
Privacy Password
Random Numbers Can Be Added Before or After
Fire Rating
120 Minutes (AU 1530.4:2014)
1. Confirm The Direction of The Door
This smart lock is suitable for Left Out/Left In/Right Out/Right In installation. 4 kinds of door
opening orientations.
