3. Because OED is the MAHP, it is automatically a
Hold waypoint and flight plan sequencing is
suspended. Verify that the OBS/HLD annunciator
is lighted.
Point G (At the MAHP)
1. Upon crossing OED, press
ENTER
when prompted
to set the inbound holding course (153°). Use the
LARGE
and
SMALL
knobs to select 153°. Then, press
ENTER
.
OBS DTK: 153° to
OED
mahp
man
brg 175
dtk 020
2. After selecting 153° inbound, enter the Holding
pattern as you would for a VOR with 153° selected
on the OBS.
Point H (Inbound to OED in Hold Pattern)
1. Once cleared to reshoot the approach and you are
established inbound in the holding pattern, fly
Direct-To OED (the IFAF).
2. Press
FPL
twice (in the Map function, press
SEL
twice) to reach your active flight plan.
3. Turn the
SMALL
knob to reach the leg where OED
(IFAF) is the TO waypoint.
LMT
to OED
1** 274° 55.9nm
arpt
ifaf
4. Press
DIRECT-TO
and then
ENTER
. Verify the
OBS/HLD annunciator is illuminated. Return to
the approach procedure beginning with point B.
9-48
Approach Examples
ENTER
ENTER
FPL
FPL
D
ENTER
Summary of Contents for 50
