The Outer selection refers to the outline of the outside
ring extended from the ground on up. Selecting Outer
will be useful to VFR pilots who wish to avoid all
airspaces. The sector selection refers to the outside
edges of the sector from the ground on up unless you
have altitude input which then allows for
3-dimensional information. The Sector selection is
the default setting and is most useful for IFR flight.
An airspace will appear in the Nearest list even if the
map or alert selections are set to off.
1. While viewing the Map Setup page, turn the
SMALL knob to the Airspace Setup page. Turn the
SMALL knob to view the desired Airspace selection
page.
Class B Airspace
Map
: Off
Alert : Off
2. Press SEL to activate selection. Turn the SMALL
knob to change the selection.
Class B Airspace
Map
: Sector
Alert : Off
3. Turn the LARGE knob to move to the next
selection. Turn the SMALL knob to select your
choice.
Class B Airspace
Map
: Sector
Alert : Outer
4. Press ENTER after making the selection. Turn the
SMALL knob to view the other Airspace pages.
69
Moving Map Functions
SEL
ENTER
Summary of Contents for Apollo GX 50
Page 1: ......
Page 17: ...I 270 K 270 L 270 M 270 N 271 O 272 P 272 R 272 S 273 T 273 U 274 V 274 W 274 xv ...
Page 18: ...xvi ...
Page 88: ...Notes 70 Moving Map Functions ...