3. Turn the Small knob to select the combination
you want shown on the Map display. In this
example, only the symbol (
+
) will be shown on
the Map display.
APT:¿ID
INT:+
VOR:ÂID
NDB:ÁID
Usr:ÀID
4. Press ENTER when you have completed your
selections, or turn the Large knob to the next item.
Airspace Setup
The Airspace Setup selections allows you to turn
Airspace notification or map display of Airspaces
On or Off, select the distance and time buffers, turn
ATC rings On or Off, and to choose the Airspace
types that will be used.
1. In the Map function. Turn the Large knob to
reach the Route Line/Map Orient page, then turn
the Small knob two clicks clockwise. The
Airspace Setup page is shown.
Airspace Setup
Map
: ON
Alerts: ON
·
2. Turn the Small knob to view the pages for
Airspace Setup. On this page you may select
whether Airspaces are shown on the Map display
or whether Airspace Alerts are provided. Press
SEL to start selection. The Map choice will
flash. Turn the Small knob to select On or Off.
Airspace Setup
Map
: Off
Alerts: Off
·
ENTER
SEL
Moving Map Functions
94