3. Turn the Large knob to move to the Alerts
choice. Turn the Small knob to select On or Off.
Press ENTER after completing your choices.
Airspace Setup
Map
: On
Alerts: On
·
Airspace Buffers
Three values may be adjusted for Airspace Buffers for
determining CLOSE information: distance, elevation,
and time. CLOSE distance may be from 0 to 99 nm at
one nm intervals. Altitude values are from 0 to 9900
feet in 100 foot intervals. Time values are from 0 to 20
minutes in one minute intervals.
1. While viewing the Airspace Buffer page, press
SEL. The distance value will flash.
Airspace Buffers
Dist
Alt
Time
2nm
500’ 10min
2. Turn the Large knob to select the desired value
to change. Turn the Small knob to change the
value.
Airspace Buffers
Dist
Alt
Time
2nm
500’ 10min
3. Press ENTER when the desired values have
been selected.
Airspace Buffers
Dist
Alt
Time
2nm
200’ 10min
ENTER
SEL
ENTER
Moving Map Functions
95