1. Press the INFO key to view information about
the airspace. Values for ceiling and floor may be
any number of positive feet less than 100,000.
Values may also be Unlimited, Ground, FL
(Flight Level, followed by a number such as
050), Unknown, or NOTAM.
KANSAS CITY
Ceil:
8000’msl
Floor:
GROUND
2. Turn the Small knob to view more information
about the airspace.
The Nearest Airspace list is updated periodically as
your aircraft moves and the following display may
appear.
Re-Organizing
Airspaces
Please Wait...
Parallel
Track
Offset
This function allows you to create a parallel course
offset to the left or right from your current
FROM-TO course from 0.1 to 20.0 nm. You must
have FROM and TO waypoints defined. Parallel
Track cannot be activated if you set a course using
Direct-To. Transitions between future flight plan
legs cannot be greater than 120 degrees. You select
to place Parallel Track “In Use” or to put it on
“Standby,” choose Left or Right of the current
course,
and
the
offset
distance.
The
PTK
annunciator (if installed) will turn on when Parallel
Track is enabled.
When Parallel Track is selected, the course line
drawn on the Map pages will show the parallel
course. If the Hold function is used when Parallel
Track is selected, the Hold waypoint will be the
phantom waypoint on the parallel offset, not the
actual waypoint. Using Direct-To will automatically
cancel Parallel Track.
INFO
Navigation Basics
33