1. In the Nav function, turn the Large knob to
display Parallel Track.
Parallel Track
Offset:
Standby
RIGHT
12.4nm
2. Press SEL. The Offset field will flash. Two
states are available: Use or Standby. If Parallel
Track is in use, “Standby” will flash. If Parallel
Track is on Standby, “Use?” will flash. If the
direction and distance values are what you want,
press ENTER. If you want to change the
direction or distance, turn the Large knob to
choose the direction or distance fields.
Parallel Track
Offset:
Use?
RIGHT
12.4nm
3. After turning the Large knob to the direction
field, turn the Small knob to choose Left or
Right.
Parallel Track
Offset:
Standby
LEFT
12.4nm
4. Turn the Large knob to the distance field. Turn
the Small knob to select the offset distance.
Parallel Track
Offset:
Standby
LEFT
5.0nm
SEL
Navigation Basics
34