4. Turn the Small knob to select the desired
waypoint type. Only Airports, NDBs, and VORs
may be used as reference points. Turn the Large
knob clockwise one click to move to the firstt
character of the identifier. Turn the Small knob
to select the desired character. Use the Large
and Small knobs to choose the identifier. After
the reference waypoint name is chosen, press
ENTER.
Ref Wpt: SLE
000.0°
000.0nm
5. The first character of the radial will flash. Now
select the needed characters for the Radial and
Distance. Turn the Small knob to change
characters. Turn the Large knob to move to the
next character.
Ref Wpt: SLE
040.0°
012.0nm
6. Press ENTER when you have finished entering
the waypoint information. You will be prompted
to create a name for the waypoint.
#000
USER
44°10.96N Rwlen
121°43.35W 0000’
ENTER
ENTER
Waypoint Database
57