must be greater than 20 knots. If there is no valid
Fuel? for the leg, dashes will replace the value.
In an inactive flight plan, the Fuel? calculation uses
the Estimated Fuel Usage value and the estimated
ground speed. The Estimated Fuel Usage value must
be greater than zero, and the actual ground speed
must be greater than 20 knots. If there is no valid
Fuel? for the leg, dashes will replace the value.
Direct-To
If the leg page displayed is the currently active leg
of the Active flight plan, and a Direct-To waypoint
has been entered, the From waypoint will say
“Direct.” The leg just prior to the currently active
leg displays the leg as if the “Direct” waypoint did
not exist. After sequencing, the “Direct” disappears,
and the currently active leg once again displays the
waypoint identifier. See page 43 for more details on
using the Direct-To function.
Direct
to DLS
2** 026°
125nm
——
arpt
WPT2
WPT1
(Departure WPT)
Present
Position
WPT3
WPT4
WPT5
Leg 1
Leg 2
Leg 3
Leg 4
Direct-To
Route
Direct-To
Waypoint
(DLS)
Flight Plan Functions
72