When you are ready to depart the hold, you enable
sequencing with the OBS/HLD button. If you are on
the “TO” side of the waypoint, the flight plan will
sequence the next time you cross the waypoint. If
you are on the “FROM” side of the waypoint, the
flight
plan
will
sequence
immediately.
The
following example shows holding at the Newburg
VOR (VBG) with 020° inbound selected as the
“OBS” course to UBG.
Continue
The Continue option is available for the Active
flight plan when the flight plan status is Holding
(waypoint sequencing is not allowed). Pressing
ENTER when this option is displayed restarts the
Active
flight
plan
and
enables
waypoint
sequencing.
1. In the Flight Plan function, turn the Large knob
to display the Name Page.
*Active*
259nm
Dest: Wpt: PDT
Holding
·
HIO (NEXT)
UBG (TO)
3S2 (FROM)
Perpendicular to
020
02
0
"TO" Side "FROM" Side
If sequencing is enabled
on the "TO" side of a line
perpendicular to the
destination waypoint, the
flightplan will sequence to
the "NEXT" waypoint
when you cross the line.
If sequencing is enabled
on the "FROM" side of a
line perpendicular to the
destination waypoint, the
flightplan will sequence
immediately to the "NEXT"
waypoint.
Flight Plan Functions
84