10
11
Factory Reset
A factory reset is useful if you have customised your WiFi details and/or login details
for the Home Gateway Settings page and can no longer remember them.
1.
Using a pen or a paperclip, gently press the Reset button, located on the
rear panel.
2.
Gently hold the button until the lights on the front panel go out, and the
Power
light turns red.
3.
The Home Gateway will reset and reboot (this may take up to 7 minutes).
Once the Home Gateway has turned on again, all settings will be returned to
factory defaults.
4.
You’ll find the default WiFi settings on the back of your Home Gateway.
Configuring a SIP Server
If for any reason a SIP server is not already configured in your Home
Gateway settings, do the following.
1.
In
Basic > Voice > SIP Server table
, select
New
and then enter the
following settings:
Profile name:
Voice
User agent port:
5060
Proxy server address:
sip.act.iinet.net.au
Proxy server port:
5060
Registration server address:
sip.act.iinet.net.au
Registration server port:
5060
SIP Domain:
iinetphone.iinet.net.au
Secondary registration server:
Tick
Server address:
sip.nsw.iinet.net.au
Server port:
5060
SIP Domain:
iinetphone.iinet.net.au
2.
Click
Submit
to finish. You’ll need to select this server as the
Profile
index
when setting up your VoIP in the
SIP
Accounts
table.
