Plug in for ADSL and VDSL2
1.
Using the power cable supplied, connect your
modem’s
Power port
to a power outlet. Press the
Power button
on the back of the modem to turn
it on.
2.
Use the supplied Phone cable to connect your
modem’s grey
DSL port
directly to the phone
socket on the wall OR the ADSL port on the line
filter, then plug the line filter into the wall.
Note:
Devices plugged into any other phone
sockets in your home should have a line filter.
3.
If you wish to use your VoIP phone service,
connect a phone handset to your modem’s
Phone1 port
.
4.
You can use an additional Ethernet cable to
connect your computer to any of your modem’s 4
LAN ports
. Alternatively, follow the steps later in
this guide to connect devices via WiFi.
Turn to
Page 14
to continue setup.
Phone Cable
Ethernet Cable
Plug into handset
Plug into your computer’s
(Optional)
Ethernet Port
(Optional)
Line Filter
Only needed if you
have ADSL and you
Phone Cable
Power Cable
Plug into the phone
Plug into a power outlet
need to plug the
socket on the wall
modem and a handset
for Home Phone into
PHONE
ADSL
1
2
3
4
the same wall socket
6
