Plug in for NBN
™
FTTN/FTTB and Naked DSL
1.
Using the power cable supplied, connect your
modem’s
Power port
to a power outlet. Press the
Power button
on the back of the modem to turn
it on.
2.
Use the supplied Phone cable to connect your
modem’s grey
DSL port
directly to the phone
socket on the wall (remove any other phone or fax
devices). Do not use a line filter.
3.
If you wish to use your VoIP phone service,
connect a phone handset to your modem’s
Phone1 port
.
4.
You can use an additional Ethernet cable to
connect your computer to any of your modem’s 4
LAN ports
. Alternatively, follow the steps later in
this guide to connect devices via WiFi.
Turn to
Page 14
to continue setup.
1
2
3
4
Power Cable
Plug into a power outlet
Phone Cable
Plug into handset
(Optional)
Phone Cable
Plug into the phone
socket on the wall
Ethernet Cable
Plug into your computer’s
Ethernet Port
(Optional)
7
