Plug in for NBN
™
FTTC
Before you get started...
If you received a new NBN™ Connection Box along with your
modem, please follow its setup guide to get it plugged in and
turned on before you set up your modem.
1.
Using the power cable supplied, connect your
modem’s
Power port
to a power outlet. Press the
Power button
on the back of the modem to turn
it on.
2.
Use the supplied Ethernet cable to connect your
modem’s red
WAN port
to the yellow
GATEWAY
port on your NBN™ Connection Device.
3.
If you wish to use your VoIP phone service,
connect a phone handset to your modem’s
Phone1 port
.
4.
You can use an additional Ethernet cable to
connect your computer to any of your modem’s 4
LAN ports
. Alternatively, follow the steps later in
this guide to connect devices via WiFi.
Turn to
Page 14
to continue setup.
Ethernet Cable
Plug into your computer’s
Ethernet Port
(Optional)
Phone Cable
Plug into handset
(Optional)
Power Cables
Plug into 2 power outlets
NBN™ Connection Device
Connects to your modem via
Ethernet to the WAN Port
Phone Cable
Plug into the phone
socket on the wall
1
2
3
4
8