ENGLISH
14 TROUBLE SHOOTING / RECYCLING INFORMATION
The screen is
shaking.
The picture does
not appear.
The AC Adapter is firmly seated in the connector and the socket.
The Power Switch is turned ON.
The AC socket is live. Please check with another piece of equipment.
If the Touch Panel PC is in sleep mode, press the Power Switch or any
other button or touch the screen.
By default, the Touch Panel PC enters into sleep mode after 10
minutes of no operation. You can choose “Never sleep” in the
application of Settings / Display / Sleep.
Increase the Brightness.
The pins of the connectors are not crooked or broken.
No sound
The touch screen
does not work.
The power voltage is within the specification of the Touch Panel PC.
TROUBLE SHOOTING
Problem
Check
If the Touch Panel PC fails to operate correctly, please follow the steps below for a possible solution.
1. Perform the adjustments described in OPERATING THE TOUCH PANEL PC, depending on the
problem you have. If the Touch Panel PC does not get a picture, skip to 2.
2. Consult the following items if you cannot find an appropriate adjustment item in OPERATING THE
TOUCH PANEL PC or if the problem persists.
3. If you are experiencing a problem which is not described below or you cannot correct the problem,
discontinue using the Touch Panel PC and contact your dealer or iiyama service center for further
assistance.
The Volume is turned up.
Check the sound settings.
For better environment protection please don't dispose your Touch Panel PC.
Please visit our web site: www.iiyama.com for Touch Panel PC recycling.
RECYCLING INFORMATION
It takes about 15 seconds or more to activate the P-CAP touch screen
function after power is turned off and on. This is normal operation. Please
wait for a certain period.
NOTE
Summary of Contents for Pro Lite TW1023ASC
Page 2: ...ENGLISH...