AmpliTube
X-TIME
Delay Models
13
ANALOG
This analog delay is harmonically rich and can be pushed to add color and the characteristic saturation of
console preamplifiers, which blends perfectly with the direct sound coming from your instrument. Its sound can
be shaped even further with its high-pass and low-pass filters.
Parameters
• TIME: controls the time of the delay repetitions.
From 60 ms to 2000 ms or from 1/32 to 1/1T when BPM SYNC is ON.
• FEEDBACK: controls the number of repetitions occurring in the delay.
From 0% to 100%.
• FILTER: controls the amount of tilt filter being applied. Turn it counterclockwise to achieve darker
tones or clockwise for brighter tones. The filter is being placed before the saturation stage to shape its
characteristics and the way it reacts with the incoming sound.
From -20 dB to +20 dB.
• MOD: controls the amount of saturation being applied.
From 0 dB to 20 dB
• MIX: Controls the balance of dry and wet signal. At 0% the signal is fully dry, while at 100% the signal is
fully wet. At around 85% the dry and wet signal have the same level.
From 0% to 100%.
• LOW PASS: controls the frequency for the low-pass filter.
From 600 Hz to 19000 Hz.
• HIGH PASS: controls the frequency for the high-pass filter.
From 22 Hz to 500 Hz.
• X-MODE: the X-MODE pushes the feedback to infinity and activates an LFO that modulates its tail.
ON or OFF.
ANALOG Control Changes
Parameter
Control Change #
Values
TIME
21
0 – 127
FEEDBACK
22
0 – 127
FILTER
23
0 – 127
MOD
24
0 – 127
MIX
25
0 - 127
LOW PASS
46
0 - 127
HIGH PASS
47
0 - 127
X-MODE
13
0 - 127
When a parameter range is not linear its values are equally divided among the 128 steps of a Control Change
value.
