AmpliTube
X-TIME
Delay Models
24
PITCH
A delay that pitches up or down from the original tone to create pitched effects in the repeats. It features three
pitched notes to get a triple-pitched effect and create a wall of lines in the delay by easily using one finger.
Parameters
• TIME: controls the time of the first delay repetitions.
From 0 ms to 2000 ms or from 1/32 to 1/2T when BPM SYNC is ON.
• FEEDBACK: controls the number of repetitions occurring in the first delay.
From 0% to 100%.
• FILTER: controls the tilt filter gain for the first delay. Turn it counterclockwise to get darker tones or
clockwise get the full frequency spectrum.
From -20 dB to +20 dB.
• MOD: controls the pitch of the first delay.
From -24 semitones to 24 semitones.
• MIX: controls the balance of dry and wet signal. At 0% the signal is fully dry, while at 100% the signal is
fully wet. At around 85% the dry and wet signal have the same level.
From 0% to 100%.
• LEVEL 2: controls the volume of the second delay.
From 0 to 10
• TIME 2: controls the time of the second delay repetitions.
From 0 ms to 2000 ms or from 1/32 to 1/2T when BPM SYNC is ON.
• FDBK 2: controls the number of repetitions occurring in the second delay.
From 0% to 100%.
• FILTER 2: controls the tilt filter gain for the second delay. Turn it counterclockwise to get darker tones or
clockwise get the full frequency spectrum.
From -10 dB to +10 dB.
• PITCH 2: controls the pitch of the second delay.
From -24 semitones to 24 semitones.
• PAN 2: controls the pan of the second delay in the stereo spectrum.
From -1 to +1.
• LEVEL 3: controls the volume of the third delay.
From 0 to 10
• TIME 3: controls the time of the third delay repetitions.
From 0 ms to 2000 ms or from 1/32 to 1/2T when BPM SYNC is ON.
• FDBK 3: controls the number of repetitions occurring in the third delay.
From 0% to 100%.
• FILTER 3: controls the tilt filter gain for the third delay. Turn it counterclockwise to get darker tones or
clockwise get the full frequency spectrum.
From -10 dB to +10 dB.
• PITCH 3: controls the pitch of the third delay.
From -24 semitones to 24 semitones.
• PAN 3: controls the pan of the third delay in the stereo spectrum.
From -1 to +1.
