AmpliTube
X-TIME
Delay Models
26
HARM
A delay that harmonizes up or down from the original tone to easily create delayed chords by playing just one
note, thanks to its double harmonator. Harmonize any solo part by adding up to three harmonies that follow your
lead.
Parameters
• TIME: controls the time of the first delay repetitions.
From 0 ms to 2000 ms or from 1/32 to 1/2T when BPM SYNC is ON.
• FEEDBACK: controls the number of repetitions occurring in the first delay.
From 0% to 100%.
• FILTER: controls the tilt filter gain for the first delay. Turn it counterclockwise to get darker tones or
clockwise get the full frequency spectrum.
From -20 dB to +20 dB.
• MOD: controls the pitch interval of the first delay.
• 1st, 2nd, 3rd, 4th, 5th, 6th, 7th, 8th.
• MIX: controls the balance of dry and wet signal. At 0% the signal is fully dry, while at 100% the signal is
fully wet. At around 85% the dry and wet signal have the same level.
From 0% to 100%.
• OCTAVE: selects the octave on which the first delay is harmonizing.
From -2 octaves to +1 octave.
• KEY: selects the key for the harmonizer.
C/Am, Db/Bbm, D/Bm, Eb/Cm, E/C#m, F/Dm, Gb/Ebm, G/Em, Ab/Fm, A/F#m, Bb/Gm, B/G#m
• LEVEL 2: controls the volume of the second delay.
From 0 to 10
• TIME 2: controls the time of the second delay repetitions.
From 0 ms to 2000 ms or from 1/32 to 1/2T when BPM SYNC is ON.
• FDBK 2: controls the number of repetitions occurring in the second delay.
From 0% to 100%.
• FILTER 2: controls the tilt filter gain for the second delay. Turn it counterclockwise to get darker tones or
clockwise get the full frequency spectrum.
From -20 dB to +20 dB.
• INTRVL 2: controls the pitch interval of the second delay.
1st, 2nd, 3rd, 4th, 5th, 6th, 7th, 8th.
• OCTAVE 2: selects the octave on which the second delay is harmonizing.
From -2 octaves to +1 octave.
• PAN 2: controls the pan of the second delay in the stereo spectrum.
From -1 to +1.
• LEVEL 3: controls the volume of the third delay.
From 0 to 10
• TIME 3: controls the time of the third delay repetitions.
From 0 ms to 2000 ms or from 1/32 to 1/2T when BPM SYNC is ON.
• FDBK 3: controls the number of repetitions occurring in the third delay.
From 0% to 100%.
