English
7
The possible configurations are:
• One iRig Mic Lav connected to the device and a pair of headphones (switch in “HP” position);
• Two iRig Mic Lavs connected (switch position on “2nd Mic” on the first microphone) and a pair of
headphones (switch position on “HP” on the second microphone).
Troubleshooting
I have connected a second iRig Mic Lav but it doesn’t seem to work.
Remember to always select the correct position on the switch (“2nd Mic” position) BEFORE you connect the
second microphone.
I have connected a pair of headphones but the mic doesn’t seem to work properly.
Remember to always select the correct position on the switch (“HP” position) BEFORE you connect your
headphone.
Specifications
Transducer type: condenser, electret
Polar pattern: omnidirectional
Frequency response: 30 Hz - 16 kHz, -3dB
Max SPL: 120dB SPL
Sensitivity: -35±3dB at 1 kHz, 0dB=1V/Pa
Capsule diameter: 6mm
Cable length: 150cm
Output connector: 1/8” TRRS
On the first iRig Mic Lav
On the second iRig Mic Lav
