English
8
5. Now your iOS device is charging.
iRig accessories with Micro-USB connector
1. Connect the AC power-adapter to the main electricity grid.
2. Connect the included Mini-DIN to Micro-USB cable to the Micro-USB port on the iRig accessory.
3. Connect the included Mini-DIN cable to the Mini-DIN port on iRig PowerBridge.
4. Connect the Lightning or 30-pin captive cable to your iOS device.
5. Now your iOS device is charging.
NOTE: The iRig accessory is able to communicate with the iOS device even if the PSU is not connected to the
mains.
Please note that if you iOS device shows you the “Not
Charging” message, then the digital iRig accessory you
are using needs a firmware update. Please visit your
user area to install the latest update:
www.ikmultimedia.com/userarea
