Charging Times
Normal
Charge
Time
Fully
Charge
Time
~375 min
~450 min
Be sure to charge the battery pack before you start using your Mylo Light.
We recommend charging the battery pack in an ambient temperature between 10
°
C~30
°
C (50
°
F~86
°
F)
until the charge lamps are fully lit. If you charge the battery pack outside of this temperature range, you
may not be able to charge it efficiently. Battery pack performance decreases when ambient temperature is
10
°
C (50
°
F) or below, and the length of time you can use the battery pack becomes shorter. In that case,
do the following to use the battery pack for a longer time. Put the battery pack into a pocket to warm it up,
& insert your Mylo light right before you turn it on.
About Battery Life
Battery capacity decreases over time and through repeated use. If you notice problems with the battery
keeping charge, it is probably time to replace it with a new one. Each battery’s life is governed by storage,
operating, and environmental conditions.
Specifications
Optional Accessories
Some other products that work well with the Mylo Lights available from Ikan include:
CV600
HD-STND
ROLLR-STND10
SW-04
KCP-703
Digital LED Meter
Heavy Duty Light Stand
2 Stage Roller Stand 10 ft 6 in
Safety Wire
Stage Clamp w/ 16mm Stud
Specs
Beam Angle
50°
Build Material
Heavy Duty Metal Construction
Cooling System
Passive Cooling
Dimming
Knob Control
Fixture Power Consumption
48W; 7.4-14.8 VDC
Fixture Size
14 x 7 x 2 in.
Fixture Weight
6 lbs
Head Type
Bi-Color 5600K
Lens
45°
Light Source
800 0.06 Watt LEDs
Power Supply
Input: 110-240 VAC
Output: 15 VDC@5.0A
Stand Mount
Baby 5/8" Junior 1 1/8" Combo Pin
