15
Illus. 22
Illus. 21
Illus. 20
Instruction
manual
Instruction manual for
rescue lifting device
Abb. 20
Abb. 20
Abb. 20
Illus. 23
Abb. 20
Abb. 20
Abb. 20
Abb. 20
Illus. 24
Illus. 25
Illus. 26
Required operations:
1. Open the sealed chain hoist.
2. The locking pin (illustration 26) is equipped with a pull
rope. The pulling direction (illustration 25) is defined
downwards.
3. Pull out the locking pin (illustration25). The chain wheel
will pop out audibly to the side by spring force (action
1).
4. Rotate the chain wheel (illustration 23) back and
forth by pulling the chain (action 2) until the gear has
engaged. Release the pull rope of the locking pin. The
locking pin will return to its initial position (illustration
24).
5. The “rescue function” of the HRA device is now estab-
lished.
6. The casualty can now be cranked up and down. De-
scending is only allowed to a maximum distance of 2 m.
Cranking up is allowed over the complete rope length.
Note:
The rescue lifting device must generally be inspected
by an expert trained by the manufacturer after each use.
ENGLISH
Labelling of the self-retracting lifeline with rescue lifting device:
40
40
for rescue purposes only
solo para fines de rescate
nur für Rettungszwecke geeignet
uniquement franzà des fins de sauvetage
461CSA1218
IKAR HRA Typelabel Pictogramm
461CSA1218
HRA 12 HRA 12 D HRA 12 E HRA 18 HRA 18 D HRA 18 E HRA 18 P HRA 18 PD
Layout date:
approved for print:
date: ____________________
signature: ____________________
19. Dezember 2018
Text
RAL WeissAluminium
Pantone 485 (Pictogram)
Pantone 329 (Pictogram)
Cut Contour
Material: Oracet 3951GHT-000
Untergrund: Aluminium oder Plastik
2
3
1
IKAR HRA small Rettungshubfunktion
462CSA9518
HRA 12 HRA 12 D HRA 12 E HRA 18 HRA 18 D HRA 18 E HRA 18 P HRA 18 PD
HRA 24 HRA 24 D HRA 24 E
Layout date:
approved for print:
date: ____________________
signature: ____________________
2. Mai 2018
Text
Pantone 173 C
Cut Contour
88
mm
54 mm
Bedienungsanleitung
Rettungshubfunktion/ Instruction/ Rescue
function/ fonction de sauvetage
1
3
2
Plombe im Rettungsfall entfernen
To operate gearing mechanism remove seal
Ouvrir fermeture auto-agrippante plombee
Kurbel nach oben ziehen, leicht drehen bis
Zahnrad und Pilzgriff einrasten
Pull handle up, turn slightly until gear wheel
and trigger No. 3 snap in
Pilzgriff herausziehen
Pull gear trigger No. 3 out
Tirer le boulon d‘arret avec la poignee
plastique
462CSA9518
Bedienungsanleitung
Rettungshubeinrichtung
mit Haspelkette -
Instructions for rescue
lifting device -
Notice d‘utilisation du
dispositif de secures -
1
3
2
IKAR HRA Haspelkette
462CSA9560
Layout date:
approved for print:
date: ____________________
signature: ____________________
8. März 2018
Text
Pantone 173 C
Cut Contour
1.
Verplombten Kettenzug
öffnen - open the sealed
chain hoist - ouvrir fermeture
auto-agrippante plombée
2.
Rastbolzen mit Zugseil
herausziehen
Pull out locking pin
Tirer le boulon a‘arrêt
3.
Kettenrad durch Zug an der Kette
hin- und herdrehen bis das Getriebe
eingerastet ist -
Rotate the chain wheel back and forth by
pulling the chain until the gear has engaged -
Faire tourner la roue dentée, jusqu‘à ce que le
mécanisme s‘engage
462CSA9560
Material: Oracet 3951GHT-000
Untergrund: Aluminium
Instruction manual for rescue lifting device. Function description of self-
retracting lifelines with rescue lifting device through reel chain drive
(type HRA) according to EN 1496:2007 - class B
Rescue application:
Reel chain
drive
Locking pin with
pull rope
((Action 2)
Summary of Contents for HRA Series
Page 4: ...4 ...
