IKEA 404.964.52, Manual

The correct operation of the

appliance can only be guaranteed

within the specified temperature

range.

If you have any doubts regarding

where to install the appliance,

please turn to the vendor, to our

customer service or to the

nearest Authorised Service

Centre.

It must be possible to disconnect

the appliance from the mains

power supply. The plug must

therefore be easily accessible

after installation.

Inspection checklist

Please follow the inspection checklist before

using your appliance. If any answer is "NO",

follow the relevant action. Remember to

write down the product serial number and

article number as required and attach your

receipt to this page.
Product serial number (Ser. No.):
.....................................
Product article number (Art. No.):
.....................................
Purchasing date:
.....................................

GROSS CAPACITY

BRUTTO INHALT

CLASS

KLASSE

REFRIGERATOR NET CAPACITY

KUEHLSCHRANK NUTZINHALT

XXX l

XXX l

TYPE-TYP

XXXXXXXXXX

230-240V

REFRIGERANT

KAELTEMITTEL

FREEZER NET CAPACITY

GEFRIERSCHRANK NUTZINHALT

XX l

FREEZING CAPACITY

GEFRIERVERMOEGEN

X kg/24h

DEFROST HEATER

ABTAUWIDERSTAND

XXX W

XXXXXXXXX

1.0 A

50 Hz

MODEL

XXXXXXXXXXXX

PNC

XXXXXXXXX XX

SER.N.

XXXXXXXX

XX/X/XX/X

Made in Hungary
@ Inter IKEA Systems B.V. 1999

XXXXXXXXX

P

Q

M

xxxx

xxxxx

IKEA of Sweden AB

SE 343 81 Älmhult

TYPE I

RISING TIME

LAGERZEIT BEI STORUNG

XX h

Art. No.

Ser. No.

To check

If the answer is NO

Make sure gasket

seals all around the

door when the door

is closed.

Refer to the assem‐

bly instruction -

door alignment.

Check if there is no

collision between

parts/furniture while

opening and closing

the door.

Refer to the assem‐

bly instruction -

door alignment.

Install the appliance

in the built-in struc‐

ture.

Follow the assembly

instruction for the

proper installation.

Make sure that at

first installation or

after reversing the

door the appliance

stands in vertical po‐

sition for at least 4

hours before it is

connected to the

power supply.

Wait 4 hours before

connecting the ap‐

pliance to the power

supply.

ENGLISH 

5

To download the full version visit www.ikea.com