HRVATSKI
11
Kod prikaza
Opis
Mogući uzroci
Rješenje
F0E2, F0E4, F0E6,
F0E8, F0EC, F1E1, F6E1,
F7E5, F7E6
Isključite napajanje ploče za kuhanje.
Pričekajte nekoliko sekundi, a zatim ponovno spojite ploču za kuhanje na električnu mrežu.
Ako se problem i dalje pojavljuje, obratite se servisu i navedite kod pogreške koji se prikazuje na zaslonu.
npr.
Ploča za kuhanje ne dopušta
uključivanje posebne funkcije.
Regulator snage ograničava
razine snage u skladu s
maksimalnom vrijednosti koja
je postavljena za ploču za
kuhanje.
Pogledajte odjeljak “Upravljanje
snagom”.
npr.
Induction hobs may whistle or creak during normal operation.
These noises actually come from the cookware and are linked to the
characteristics of the pan bottoms (for example, when the bottoms are
made from different layers of material or are irregular).
These noises may vary according to the type of cookware used and to
the amount of food it contains and are not the symptom of something
wrong.
SOUNDS PRODUCED DURING OPERATION
TROUBLESHOOTING
• Check that the electricity supply has not been shut off.
• If you are unable to turn the hob off after using it, disconnect it from the
power supply.
• If alphanumeric codes appear on the display when the hob is switched on,
consult the following table for instructions.
Please note: The presence of water, liquid spilled from pots or any
objects resting on any of the hob buttons can accidentally activate or
deactivate the control panel lock function.
DISPLAY CODE
DESCRIPTION
POSSIBLE CAUSES
SOLUTION
F0E1
Cookware is detected but it is not
compatible with requested operation.
The cookware is not well positioned on
the cooking zone, or it is not compatible
with one or more cooking zones.
Press On/Off button twice to remove the
F0E1 code and restore the functionality
of the cooking zone. Then, try to use the
cookware with a different cooking zone, or
use different cookware.
F0E7
Wrong power cord connection.
The power supply connection is not
exactly as indicated in “ELECTRICAL
CONNECTION“ paragraph.
Adjust the power supply connection
according to “ELECTRICAL CONNECTION“
paragraph.
F0EA
The control panel switches off because
of excessively high temperatures.
The internal temperature of electronic
parts is too high.
Wait for the hob to cool down before using
it again.
F0E2, F0E4, F0E6,
F0E8, F0EC, F1E1,
F6E1, F7E5, F7E6
Disconnect the hob from the power supply.
Wait a few seconds then reconnect the hob to the power supply.
If the problem persists, call the service centre and specify the error code that appears on the display.
d E
[when the hob is off]
The hob does not switch heat up.
The functions do not come on.
DEMO MODE on.
Follow the instructions in the “DEMO
MODE“ paragraph.
e.g.
:
The hob does not allow a special
function to be activated.
The power regulator limits the power
levels in accordance with the maximum
value set for the hob.
See paragraph "Power management".
e.g.
[Power level lower than
level requested]
The hob automatically sets a minimum
power level to ensure that the cooking
zone can be used.
The power regulator limits the power
levels in accordance with the maximum
value set for the hob.
See paragraph "Power management".
AFTER-SALES SERVICE
In order to receive a more complete assistance, please register your
product on www . indesit . com / register.
BEFORE CALLING THE AFTER-SALES SERVICE:
1.
See if you can solve the problem by yourself with the help of the
suggestions given in the TROUBLESHOOTING.
2.
Switch the appliance off and back on again to see if the fault persists.
IF AFTER THE ABOVE CHECKS THE FAULT STILL OCCURS, GET IN
TOUCH WITH THE NEAREST AFTER-SALES SERVICE.
To receive assistance, call the number shown on the warranty booklet or
follow the instructions on the website www . indesit . com .
When contacting our Client After sales service, always specify:
• a brief description of the fault;
• the type and exact model of the appliance;
XXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXX
Made in X
Type: XXX
Mod.: XXX
01
XXXX XXX XXXXX
XX XXXX XXXXX
XXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
• the service number (number after the word Service on the rating
plate). The service number is also indicated on the guarantee
booklet;
• your full address;
• your telephone number.
If any repairs are required, please contact an authorized after-sales
service (to guarantee that original spare parts will be used and repairs
carried out correctly).
In the case of flush-mounted installation, call the After Sales Service to
request assembly of screws kit 4801 211 00112.
400011415253
EN
[Razina snage niža je
od zatražene]
Ploča za kuhanje automatski
postavlja minimalnu razinu snage
da bi se osiguralo da se zona za
kuhanje može upotrebljavati.
Regulator snage ograničava
razine snage u skladu s
maksimalnom vrijednosti koja
je postavljena za ploču za
kuhanje.
Pogledajte odjeljak “Upravljanje
snagom”.
Zvukovi koji se javljaju tijekom rada
Indukcijske ploče mogu zviždati ili pucketati tijekom rada.
Te zvukove zapravo proizvode posude, a povezani su s
karakteristikama dna posude (na primjer, ako je dno napravljeno
od više različitih slojeva materijala ili ako je nepravilno).
Ti zvukovi mogu ovisiti o vrsti posuda koje koristite i količini
namirnica koje one sadrže te ne predstavljaju nikakav kvar.
Prije kontaktiranja postprodajnog servisa:
1. Ako se pojavi pogreška, pokušajte je riješiti prateći upute za
rješavanje problema.
2. Isključite i ponovno uključite uređaj kako biste provjerili je li
kvar uklonjen.
Ako je nakon gore navedenih provjera smetnja i dalje
prisutna, obratite se najbližem postprodajnom servisu.
Cijeli popis ovlaštenih kontakta IKEE možete pronaći na kaju
ovog korisničkog priručnika.
Kada kontaktirate korisničku službu uvijek navedite:
• kratki opis kvara,
• vrstu i točan model uređaja;
• servisni broj (broj iza riječi “Service” na nazivnoj pločici). Servisni
broj naveden je i u knjižici jamstva;
• svoju punu adresu;
• svoj telefonski broj.
ako je popravak potreban obratite se ovlaštenom
Postprodajnom servisu (kako bi se jamčila uporaba originalnih
rezervnih dijelova i ispravan popravak).
Model: TREVLIG 504.678.35
Vrsta ploče za kuhanje
Električni
Broj grijaćih ploča
4
Tehnologija zagrijavanja
Indukcija
Dimenzija grijača (Ø ili ŠxD)
Prednji lijevi 15,0 cm
Stražnji lijevi 21,0 cm
Stražnji desni 18,0 cm
Prednji 18,0 cm
Potrošnja energije po zoni za kuhanje – (električno kuhanje EC)
Prednja lijeva 175,1 Wh/kg
Stražnja lijeva 178,0 Wh/kg
Stražnja desna 170,0 Wh/kg
Prednja desna 171,4 Wh/kg
Potrošnja energije ploče za kuhanje – (električna ploča za kuhanje
EC)
173,6 Wh/kg
Ovaj uređaj zadovoljava zahtjeve ekološkog načina izrade europske uredbe br. 66/2014 u skladu s europskom normom EN 60350-2
Tehnički podaci
SERVICE
PLER8
00
220-240 V ~ 50-60 Hz
7,2 kW
HB I84F
1806
F101090
HB I84F
869991010900
901806030988
I.C.
SN
802080988
769991010902
Tehničke informacije se nalaze na natpisnoj pločici s donje
strane uređaja.
