IKEA 603-039-33 Manual Download

Page: 17 / 25

Removing the residues and stubborn

residues

1. Food containing sugar, plastics, tin foil

residues should be removed at once,

best tool for cleaning glass surface is a

scraper (not included with the

appliance). Place a scraper on the glass

ceramic surface at an angle and remove

residues by sliding the blade over the

surface. Wipe the appliance with a

damp cloth and a little washing up

liquid. Finally, rub the appliance dry

using a clean cloth.

2. Limescale rings, water rings, fat

splashes, shiny metallic discolorations

should be removed after the appliance

has cooled down using cleaner for glass

ceramic or stainless steel.

Troubleshooting

Warning!

Refer to Safety

chapters.

What to do if...

Problem

Possible cause

Remedy

You cannot activate or oper-

ate the hob.

The hob is not connected to

an electrical supply or it is

connected incorrectly.

Check if the hob is correctly

connected to the electrical

supply. Refer to the connec-

tion diagram.

The fuse is blown.

Make sure that the fuse is

the cause of the malfunction.

If the fuse is blown again

and again, contact a quali-

fied electrician.

Activate the hob again and

set the power setting is less

than 10 seconds.

You touched 2 or more sym-

bols at the same time.

Touch only one symbol.

STOP+GO function operates. Refer to "Daily use" chapter.

There is water or fat stains

on the control panel.

Clean the control panel.

An acoustic signal sounds

and the hob deactivates.

An acoustic signal sounds

when the hob is deactivated.

You put something on one or

more symbols.

Remove the object from the

symbols.

ENGLISH

Summary of Contents for 603-039-33


























Search results

Summary of Contents for 603-039-33

Reviews:

Related manuals for 603-039-33

Brands by name

Popular brands

IKEA 603-039-33, Manual

Search results

Summary of Contents for 603-039-33

Reviews:

Related manuals for 603-039-33

Brands by name

Popular brands