Daily Use
Switching on and off
Touch for 2 seconds to switch the
appliance on or off.
Adjusting the heat setting
Touch the control bar at a desired heat
setting. Correct to the left or the right, if
necessary. Do not release before you reach
a desired heat setting.
Activating and deactivating the outer
rings
Switching the oval zone on and off
Switch the oval zone on by touching
for
1 - 2 seconds. Repeat the procedure to
switch off the outside ring.
Before an outside oval can be
switched on, the inside ring must
be switched on.
Switching the outside rings on and off
Switch on the inside ring before you switch
on the outside rings by touching for 1 - 2
seconds. For more outer rings touch the
same sensor field again. The subsequent
indicator comes on. Repeat the procedure
to switch off the outside rings.
Using the Timer
Touch repeatedly until the pilot light of a
desired cooking zone displays. For example
for the front left zone.
Touch or of the Timer to set the time
between
00
and
99
minutes. When the
pilot light flashes more slowly, the time
counts down. Set the heat settings.
If the heat setting is set and the time set has
elapsed, acoustic signal appears,
00
flashes, and cooking zone switches off. If
cooking zone is not in use and the time set
has elapsed acoustic signal appears and
00
flashes.
Select for a cooking zone to switch off
the function, and the pilot light of the
cooking zone selected flashes faster. Touch
and the remaining time counts
backwards to
00
. The pilot light goes out.
STOP+GO
The function sets all cooking zones that
operate to the lowest heat setting . When
the function operates, you cannot change
the heat setting. The function does not stop
the timer function.
• To activate this function touch . The
symbol comes on.
• To deactivate this function touch . The
heat setting that you set before comes
on.
Lock
When the cooking zones operate, you can
lock the control panel, but not . It
ENGLISH
48
