ENGLISH
9
Problem
Possible cause
Solution
The electric ignition does not
work
There is no electrical
supply
Check the unit is plugged in
and the electrical supply is
switched on.
The burner fails to ignite
The gas tap could be
closed
Check that the gas tap is
open
The gas ring burns unevenly
Burner crown may
be occluded by food
residues
Clean the burner crown
according to cleaning
instructions to make sure that
the burner crown is clear of
food residues.
What to do if ...
Before calling the After-Sales Service:
1. Check “Troubleshooting guide” to see if
you can eliminate the problem yourself
2. Turn the hob on again to check if correct
operation has been restored.
3. If the problem persists, contact the After-
sales Service.
Give the following information:
•
type of fault;
•
hob model;
•
service number (i.e. the number after the
word SERVICE on the dataplate under
the hob and on the warranty certificate);
•
your full address;
•
your telephone number.
If any repairs are required, contact an
authorised service centre, indicated in the
warranty.
Failure to comply with these instructions
may compromise the safety and quality of
the product.
Check these items frequently, and if
necessary, clean them with a damp cloth.
Any baked-on food should be removed
with a toothpick or needle.
NOTE
: to avoid damaging the electric
ignition device, do not use it when the
burners are not in their housing.
Summary of Contents for LIVSGNISTA AA-1147124-1
