9
ENGLISH
W
D
Levelling feet
If the appliance tilts in some way, adjust the
height of the left/right foot of the appliance to
be in a horizontal level. Refer to the separate
Assembly Instructions for detailed installation.
1. Disconnect the mains plug of the appliance
from the power socket.
2. Turn the foot clockwise to raise the
appliance; turn the foot counter clockwise to
lower the appliance.
Reversing doors (optional)
Based on the location of the appliance, you
may need to reverse the doors to allow for easy
access to the appliance contents.
A suitable screwdriver and/or wrench is needed
for door re-installation.
Refer to the separate Assembly Instructions for
detailed installation.
Installing distance holder
Warning!
Serious or fatal crushing injuries
can occur from appliance tip-over. ALWAYS
secure this appliance to the wall using tip-
over restraints.
Using the supplied distance holder to fix
the appliance to the wall for the following
advantages. Refer to the separate Assembly
Instructions for detailed installation.
• Allow enough space for air circulation
between the appliance and the walls.
• Secure the appliance to the wall for tip-over
prevention.
Electrical connection
Caution!
Any electrical work required to
install this appliance should be carried
out by a qualified electrician or competent
person.
Warning!
This appliance must be earthed.
Failure to follow these instructions can
result in death, fire or electrical shock.
The manufacturer declines any liability should
these safety measures not be observed.
First use
Cleaning the interior
Before using the appliance for the first
time,wash the interior and all internal
accessories with lukewarm water and same
neutral soap so as to remove the typical smell of
a brand new product, then dry thoroughly.
Important!
Do not use detergents or abrasive
powders, as these will damage the finish.
