IKEA RODULF, Manual

9

To access full stroke 

• 

Release the down button at the lowest safe point 

and then press the down button again for 5 

seconds. The desk will move to the mechanical 

lowest height to have full stroke access.

Simple memory 

To set memory/end positions: 

• 

Move your desk to the level you want to store. 

• 

Press both buttons three times (0.5-1 second 

between each press). 

• 

Then press "up" or "down" to set the position 

(0.5-1 second). 

• 

Do the same for your second stored setting.

Collision detection 

• 

The system is designed to avoid possible 

damages to equipment due to collision. 

When desk detects a sudden change in 

resistance it will stop the movement and reverse 

approximately 50mm. 25mm of travel to activate 

in both direction.

Safety regulations 

• 

When the desk is run up/down, keep the 

necessary safety distance to avoid being trapped 

between the moving desk top and fixed objects in 

the surrounding area. 

• 

When the desk is run up/down the user should 

keep watch so that nobody is injured or no object 

is damaged. The desk top must not bump into 

a fixed object in case it overturns. Remove any 

office chair before the desk is run up/down, each 

time. 

• 

The desk legs must not be altered or 

reconstructed in any way. During service and 

repair work of the desk, the electrical cable must 

always be disconnected from the wall socket. 

• 

Modifications to the legs are absolutely 

prohibited. 

• 

The desk must not be used as a hoisting device 

for people.

Maintenance and repair instructions 

After approximately 1 week of use, check that the 

screws are properly tightened. 

• 

If the desk cannot be lowered or raised, check the 

connections between the control box and the wall 

socket. 

• 

 If any part of the electrical system is to be 

replaced, the electrical cable must first be 

disconnected from the wall socket. 

Replace the electrical part and then reconnect the 

electrical cable to the wall socket. The desk is now 

ready for use. 

If the desk still does not work, please contact your 

nearest IKEA store or customer service.

Product servicing 

Do not attempt to repair this product yourself, as 

opening or removing covers may expose you to 

dangerous voltages or other risks.

EU Declaration of Conformity

EU Declaration of Conformity is included in the 

packaging as a separate document.

Manufacturer: IKEA of Sweden AB 

Address: Box 702, SE-343 81 Älmhult, SWEDEN 

Telephone no.: +46(0)476-648500 

SAVE THESE INSTRUCTIONS