ENGLISH 8
Grease
fi
lter
The metal grease
fi
lter has unlimited
duration. It should be washed at least once
a month, either by hand,
or by placing it in the dishwasher (use a
short cycle and low temperature).
If washed in the dishwasher, the grease
fi
lter surface may become matt. This will not
cause any reduction of performance.
• To remove the
fi
lter pull out the handle.
After the
fi
lter has been washed and dried,
replace following the inverse procedure.
Replacing the lamps
1. Disconnect the hood from the electric
power supply.
2. Remove the light hood.
3. Remove the lamp that needs replacing.
Only use PL G23 11W lamps.
4. Re
fi
t the light hood.
Fitting or replacing charcoal
fi
lter
Replace the charcoal
fi
lter every 4
months. The
fi
lter may not be washed or
regenerated.
1. Disconnect the hood from the electric
power supply.
2. Remove the grease
fi
lter.
3. Apply the
fi
lter so that it covers the
protection grid of the suction motor,
ensuring that the
S
holes correspond
with the hooking pins
R
on the side of
the suction motor protection grid.
4. Turn the carbon
fi
lter clockwise to lock in
position (bayonet mount).
5. Re
fi
t the suction grid or the grease
fi
lter.
To remove the charcoal
fi
lter follow the
inverse procedure.
S
R
Summary of Contents for UDDEN HW320
