IKEA VINTERKALL, Manual

9

ENGLISH

W

D

Levelling feet

If the appliance tilts in some way, adjust the 

height of the left/right foot of the appliance 

to level the appliance. Refer to the separate 

Assembly Instructions for detailed installation.

1.  Disconnect the mains plug of the appliance 

from the power socket.

2.  Turn the foot clockwise to raise the 

appliance; turn the foot counter clockwise to 

lower the appliance.

Levelling doors

If the doors of the appliance are not aligned, 

adjust the height of the doors to be in a 

horizontal level. Refer to the separate Assembly 

Instructions for detailed installation.

1.  Disconnect the mains plug of the appliance 

from the power socket.

2.  Raise the low door to align with the higher 

door.

3.  On the bottom of the low door, use a pair 

of pliers (not supplied) to insert a supplied 

fastener-ring into the gap between the 

hinge and the hinge-grommet. Insert more 

supplied fastener-rings for height increase 

(if needed) until the two doors are aligned.

Unlevel

Hinge- 

grommet

Hinge

Installing distance holder

Warning! 

Serious or fatal crushing injuries 

can occur from appliance tip-over. ALWAYS 

secure this appliance to the wall using tip-

over restraints.

Using the supplied distance holder to fix 

the appliance to the wall for the following 

advantages. Refer to the separate Assembly 

Instructions for detailed installation.

•  Allow enough space for air circulation 

between the appliance and the walls.

•  Secure the appliance to the wall for tip-over 

prevention.

Electrical connection

Caution!

 Any electrical work required to 

install this appliance should be carried 

out by a qualified electrician or competent 

person.

Warning!

 This appliance must be earthed. 

Failure to follow these instructions can 

result in death, fire or electrical shock.

The manufacturer declines any liability should 

these safety measures not be observed.