3
3. Ground yourself by touching your computer’s chassis or power supply unit to drain any static that built up inside
your body.
NOTE:
You can permanently damage equipment if you touch it while there is any static charge in your
body.
4. Locate an available slot for the IEEE 1394 (FireWire) PCI Card and use a Philips screwdriver to remove the screw
holding the slot’s blanking plate.
5. Insert your IEEE 1394 (FireWire) PCI Card into the slot using both hands. Make sure it is seated firmly in the slot.
Then, secure the card by re-inserting the screw used for the blanking plate.
