INTRODUCTION
Congratulations on your purchase of this product.
This User Guide suits ECO-312700
product. We adopt
the latest Nextchip technical of sensor and driver. The
most attractive characteristics are small and easy hidden,
suits the elevator and corridor. In addition, it owns the
characters of high
definition and stability, strong anti-
jamming, rich and real color. Fixing and
using this model
are convenient too. It is very good for you to apply to your
CCTV system.
Please read this instruction manual carefully to en-
sure proper use of the product.
CONNECTING
BRIEF OF PRODUCT
*
Sensor
(
CCD
)
Adopt 1/3
"
Nextchip CCD Sensor.
*
Auto Gain Control (AGC)
Built-in auto gain control
(AGC)
circuit. The color
camera
can get high definition picture in low Lux condition.
*
Auto Electronic Shutter (AES)
Built-in auto electronic shutter function. The color
camera’s AES speed can reach
1/100,000
s.
*
Gama Characteristic
Camera Gama characteristic
is
0.45.
*
Scanning Mode
NTSC
or PAL
mode.
DC12V
Power Supply
Monitor
TROUBLE AND SOLUTION
Link wire rule
：
Power
Video
1. No picture after providing power
. Maybe the power supply has voltage abnormity, please check the
power
supply voltage and pole
whether exactitude
.
. Please check all the connecting cable and monitors whether be con-
nected
correctly or not
.
2. The picture level direction have flowing interference ripples
. May be caused by the power supply AC ripples, it need filter the wave
of the
power supply
.
. Check the monitor and peripheral equipments used.
3. The picture background color changes continuously
. The fluorescent lamp’s electromagnetic field cause color roll. This is
proper
phenomenon of the cameras.
. Reduce the fluorescent lamp numbers or increase the distance be-
tween the
camera and the fluorescent lamps can improve it.
. Use power supply external sync. camera can solve it.
To prevent fire or shock hazarded. Do not expose the unit
The symbol is intended to alert the user to the presence of
The symbol is intended to alert the user to the presence of
to rain
or moisture.
important operating and maintenance (servicing)
Instructions in the literature accompanying the appliance.
uninsulated ‘dangerous voltage’ within the product’s
enclosure
that may be of sufficient Magnitude to
consti-
a risk of electric shock to persons.
Video
DC12V
CAUTION:
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER OR BACK NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING
TO OUALIFIED SERVICE PERSONNEL.
RISK OF ELECTRIC. DO NOT OPEN
CAUTION:
TO PREVENT ELECTRIC SHOCKS AND RISK OF
FIRE HAZARDS, DO NOT USE OTHER THAN
SPECIFIED POWER SOURCE.
Note
：
●
The power supply
must through safe attestation. Its output volt-
age, current, voltage polarity
and operating temperature
must
match the camera’s requirement
.
●
When using the camera in the thunderbolt condition
,
please note to
mount Anti-thunder device or put off the power supply plug and
cable
.
●
In order to capture high quality pictures, the power supply’s cable
and video output cable should not be too long.
Note
:
●
Please note the camera’s operating temperature and its using
environment
requirement. Avoid using the camera at too high
or too low temperatures. The operating temperature is
–
20~
+
60
Ԩ
. (Recommendatory operating temperature is -
10~+50
Ԩ
.)
●
Never make the camera face the sun or bright object. Other-
wise, it will damage the sensor
.
●
Do not mount the camera near by the radiator
or heater.
