■
SHUTTER
・
To select each SHUTTER or change the value, “SHUT MODE” is set to the corresponding item in advance.
1/30, 1/15, 1/10, 1/8, 1/6, 1/5, 1/4, 1/3, 1/2, 1s, and 2s are the Image sensor accumulation sensitivity improvement
mode. Sensitivity improves according to the accumulation time. But the residual image also increases according to
the accumulation time. The Image sensor accumulation sensitivity improvement needs to be set with the movement of
the object.
・
When the MENU switch is pressed on the item to be set, the value on the right blinks.
Keeping this state, turn the MENU switch to select the desired value and press it.
The variable range of the variable shutter changes according to the format.
■
LENS SELECT
NUMBER : OFF : No lens file is registered.
No.1 to No.8 : Indicates the lens file number.
NAME ( ) : Manually enter a file name for each lens file.
EXTENDER : OFF : Indicates lens other than one with extender.
ON : Indicates lens with extender.
FILE SET : OFF : Does not create lens file.
MANUAL : Saves the current state as lens file.
●
Lens file
7KHFRORUEDODQFHFKDQJHVUHVXOWLQJIURPGLIIHUHQFHVLQWKHRSWLFDOSURSHUWLHVRIOHQVHVDUHVWRUHGLQDOHQV¿OH
8SWRHLJKWOHQV¿OHVDUHDYDLODEOHDQGWZRVWDWXVHVH[WHQGHU2))DQGH[WHQGHU21FDQEHVWRUHGLQHDFK¿OH
7KHGDWDLVVHOHFWHGDXWRPDWLFDOO\E\DQVZHUVLJQDOVIURPWKHOHQV:KLWHVKDGLQJÀDUHJDLQDQGJDPPDDUHVWRUHGLQDOHQV¿OH
When the HDL-F3000 is shipped, the compensation data based on the factory standard lens is registered in No.1.
[Setting lens file name]
6HWD¿OHQDPHIRUHDFKOHQV¿OH,WLVUHFRPPHQGHGWRXVHWKHPRGHOQDPHRIWKHOHQVDQGWKHOLNHIRUHDV\LGHQWL¿FDWLRQ8VH
FKDUDFWHUVIRUD¿OHQDPH
1.
2Q³0(183$*(´WXUQWKH0(18VZLWFKWRVHOHFW³/(166(/(&7´DQGSUHVVLW7KHVXEPHQXRI³/(166(/(&7´LV
displayed.
2.
7XUQWKH0(18VZLWFKWRVHOHFW³180%(5´DQGSUHVVLW7KHUHJLVWHUHGOHQV¿OHQXPEHUV2))1RWR1RDUHGLVSOD\HG
3.
7XUQWKH0(18VZLWFKWRVHOHFWWKHGHVLUHGOHQV¿OHQXPEHUDQGSUHVVLW6HWD¿OHQDPHIRU1RDQGODWHUVLQFHWKHIDFWRU\VHW
data is set for No.1.
SHUTTER
QUIT
SHUT MODE
PRESET SHUT
VAR SHUT
SLOW SHUT LIMIT
OFF
1/100
1/63.4
2S
(OFF, PRESET, VAR)
(1/10000,1/4000,1/2000, 1/1000, 1/500, 1/250,
1/120, 1/100,1/15, 1/10, 1/8, 1/6, 1/5, 1/4, 1/3,
1/2, 1s, 2s)
(1/63.4 to 1/1983)
Sets the limit to the slow shutter that can
be controlled from the remote controller.
(2s, 1s, 1/2, 1/3, 1/4, 1/5, 1/6, 1/8, 1/10, 1/15,1/30)
LENS SELECT
QUIT
NUMBER
NAME (
EXTENDER
FILE SET
OFF
5. OPERATION
5-10
Summary of Contents for HDL-F3000
