E-9
②
1SPOT
Select “ISPOT” and press the “E” button,
and the screen shown at right appears.
Highlight “ADJUST ZONE” and press
the “E” button, and the photometric
range setting screen shows up.
Each time the E button is pressed, the
photometric frame color turns blue,
green and red in this order
• Blue
Using the U, D, L or R button, the
field can be moved wherever you like.
• Green
Using the U, D, L or R button, the
field can be enlarged.
• Red
Using the U, D, L or R button, the
field can be reduced.
* To quit the field setting screen, hold down the E button longer than 2 seconds.
Once the 1SPOT ZONE screen appears, select RET and press the E button. The
previous menu shows up.
③
2SPOT
As with the 1SPOT mode, two photometric fields can be preset. Take the same
procedure as for the 1SPOT mode.
④
OFF
The backlight compensation function is off.
(3)W. DYNAMIC
The wide dynamic level can be varied with the L and R buttons. The intermediate
level is initially set. In shooting scenes with greatly fluctuating light quantities, move
the marker to the right to get a higher effect. Position the marker while watching an
actual scene.
(4)IRIS LEVEL
This item appears when the DC type iris lens is in use. Move the marker to the
right, and the lens aperture gets opener (Brightness enhanced). Position the marker
while watching an actual scene.
(5)LENS IRIS
Select the lens’ iris control system. (AUTO, MANUAL)
１ＳＰＯＴ ＺＯＮＥ
→ＡＤＪＵＳＴ ＺＯＮＥ
ＲＥＴ
ＳＰＯＴ ＺＯＮＥ−１ ＥＮＴ：２ＳＥＣ→ＲＥＴ
