9
11
POWER Connector
DC12V input. Connect the accessory AC adapter.
12
Cable Holder
After passing the power cable through the cable holder, connect to the power connector
11
to prevent the
cable from falling off during use.
12
Options
It is possible to mount the two types of optional modules listed below.
・
IP ENCODER module
・
DVI module
DVI
SD CARD
ETHERNET
DVI
DVI
14
ETHERNET
15
SD CARD
16
DVI-D Output Connector
14
ETHERNET Connector (RJ45)
Can be used with Ethernet 10Base-T/100Base-TX.
For connection with other devices, please connect a cable of category 5 or higher.
15
SD CARD
This is the insertion port for the SD card.
* The SD card is not included in the equipment spec.
Note
* Please note we assume no responsibility for warranty when videos are not saved due to any failure of
this machine and SD card.
* Although in the following cases, saved data may be damaged (lost), please note we assume no
responsibility for damage and so on caused by data corruption and so on:
Ɣ
When an SD card is used improperly.
Ɣ
When an SD card is not properly inserted into the equipment.
Ɣ
When an SD card is subject to electronic and mechanical shock or force.
Ɣ
When an SD card is removed or power is turned off during access to the SD card.
16
DVI-D Output Connector
Connects with DVI-D input monitor,etc. A DVI-D cable (option) is required for connection.