35
4.3. Scene File
This device allows setting of up to four scene files chosen according to photographic conditions. It is also
possible to return to the condition at the time of shipment from the factory.
4.3.1. Storage of Scene File
The scene fi le can be created from the menu. Because the present setting is stored in the scene fi le, adjust
beforehand to the setting you wish to store.
Use [Scene File]
ĺ
[Store Scene] to select No. 1 to No. 4 from the menu and then press the SET button.
When the menu is fi nished, it will be automatically stored to the scene fi les being selected. (Refer to Section 3.7
"Scene File").
4.3.2. Initialization of Scene File
Use [Scene File]
ĺ
[Initial Scene] to select No. 1 to No. 4 from the menu and then press the SET button.
The selected scene fi le is immediately initialized.
4.3.3. Setting of Scene File
To use the stored scene fi le operate the front panel (See page 17) or the foot switch (See page 26) or the menu
[Scene File] (See page 25) .
4.4. Snapshot (requires optional substrate)
Possible to record still images (JPEG) to SD card. The picture quality setting can be changed with [JPEG
Quality] from [IP-ENC setting] on the menu.
* The SD card is not included in the equipment spec.
4.4.1 SD Card Recording
Possible with the following two operations to record to the SD card.
Ɣ
Operation from CCU front panel.
1
Press FUNCTION button.
2
Press the
⇧
key to store the still image to the SD card.
FUNCTION/SET
MENU
1
3
2
4
①
②
Ɣ
Operation of foot switch
For setting, select [SNAPSHOT] with [FOOT Switch] on the menu.
4.4.2. For cards on which recording is fi nished
It is possible to view the recorded images on a PC.
* This device does not include a function for displaying images.
A PC is required to view images.
