6
1. Name and Function of Each Part
1.1. Camera Head
MKC-210HD
1
1/3 C-mount
2
Camera Connector
Side View
Rear View
3
Flange focus adjustment ring
4
Flange focus fixation screw
5
Screw hole for fixation
1
1/3 C-mount
This is the mount for attaching the lens.
Allows mounting of various C-mount lens and microscope adapters.
2
Camera Connector
Connects the camera connector of special camera cables.
Be aware that the size of the camera connector differs on the camera head side and CCU side.
3
Flange focus adjustment ring
Flange focus (distance from the lens mounting surface to the photographed surface) adjustment ring. Adjust
the fl ange focus to use the lens focus function under optimal conditions.
4
Flange focus fi xation screw
Fixes the fl ange focus adjustment ring.
Caution
Loosen when adjusting the fl ange focus, and tighten up to fi x after adjustment.
Over-tightening may damage the screw.
5
Screw hole for fi xation
Screw holes to fi x the camera head. Arranged one above the other.
Caution
The screw depth is about 3.0mm.
Using an overly long screw may cause it to come into contact with the fl ange focus adjustment ring, so
please be careful.