www.ikegps.com/quickstart
Page 30
www.ikegps.com/support
Laser Settings
This screen allows you to view and change the settings in
relation to the way the laser rangefinder functions.
The
Laser Mode
options controls the selection between always
on (Streaming) or single target (One Shot) mode.
The ‘Streaming’ option is the default setting for where the
laser is continually firing and providing a live range distance
to target. This option is enabled by default.
The ‘One Shot’ option causes the laser rangefinder to
attempt to determine a distance only when the
‘Capture’
button is press.
Where ‘One Shot’ Laser Mode has been selected, the
capture preview Distance value will be
shown as ‘Single’.
WARNING!
Regardless of which the Laser Mode is
selected the laser rangefinder emits a pulse that may
cause infrared transmission detectors (e.g. speed
camera detectors) to be activated.
The
Measurement Units
option controls the selection between
recording distance measurement units.
‘Feet’ option displays measured distance in feet and inches
and records in decimal feet (e.g. displayed 4’6” will record
as 4.5). This option is enabled by default.
‘Meters’ option displays and records measured distance in
decimal meters.
The capture preview and review screens will present the
measure
d range in the ‘Distance’ panel
