9
Opening the Port Locks
1.
Lift the port lock release button.
2.
Slide the port lock away from the port hole opening of the housing.
LOCKED
UNLOCKED
Release
Button
3.
The release button will stay up while the port lock is in the open
and unlocked position.
4.
Repeat with all four port locks.
Installing the Port
1.
If any portion of the lens is larger than the opening on the front
of the housing, install your camera body in the housing and then
install the lens and zoom sleeve prior to installing the port.
2.
Clean and lightly lubricate the rear port o-ring.
3.
Install the rear port o-ring onto the back of the Lens Extension. Do
not install the o-ring into the opening of the housing.
4.
Carefully place the port with o-ring into the housing port opening.
5.
Press down firmly on the center of the dome and continue to hold in
place.
