- Ikelite Digital Housing
- Housing Lanyard (attached)
- Silicone Lubricant
- Vinyl Port Cover
Package Contents
- Diffuser
- Internal Deflector
- Extra Control Tips
- Black Lens Sticker (for white cameras)
This product has been water pressure tested at the factory and is depth
rated to 200 ft. (60 m). Thoroughly inspect and immerse the empty
housing completely in water before installing a camera. If any fogging
occurs or droplets of water enter the housing, do not install a camera.
Clean the housing main o-ring and retest to make sure that it is
watertight. Refer to the Troubleshooting section, page 17.
Please read your camera manual thoroughly to have a full
understanding of each camera function.
If you are new to underwater photography, be sure to read the Photo
Tips section.
Preparation
3
Width ......................6.9 in (175 mm) including controls
Height ....................4.9 in (124 mm) including controls
Depth ......................4.7 in (119 mm) including controls and lens port
Weight ....................2.6 lb (1179 g)
Buoyancy ................Slightly negative in freshwater
Specifications
Limited Warranty
........................................................P. 22
Returning Products for Service
................................P. 23
Product Registration
..................................................Back Cover
Table of Contents
