22
Housing and O-ring Storage
When storing the housing, remove the main housing o-ring. Although
the main housing o-ring does not require lubricant to make a seal, a
light application will
keep the o-ring from drying out and also help to
show a dark sealing line.
Lightly lubricate the o-ring until it appears shiny and place in a small
resealable plastic bag. Use ONLY Ikelite lubricant. Place the bag
inside the housing and store until needed.
Store the housing away from direct sunlight and chemicals.
For extended periods of time, leave the lid snaps open to release
pressure on the lid snap springs.
Lubricant
Ikelite provides silicone lubricant with the housing to lightly lubricate
controls and o-rings. We recommend you use ONLY Ikelite lubricant
on Ikelite products. Other brands may cause Ikelite o-rings to swell
and not seal properly. Lubricant is not a sealant; it is used to reduce
friction. Excessive lubricant can collect sand, hair or debris which may
interfere with proper sealing.
CAUTION: Never use spray lubricants as the propellant
ingredient can cause the plastic housing to crack or o-rings to
swell.
Housing Maintenance
Your Ikelite Digital Housing should be given the same care and
attention as your other photographic equipment. In addition to normal
maintenance, we recommend that the housing be returned to Ikelite
periodically to be checked and pressure tested.
Do not leave the camera and housing in direct sunlight for prolonged
periods. Heat may damage the camera.
Do not ship the camera in the housing.
