LLeennss PPoorrtt
Treat the glass in the lens port as a camera lens. After use, rinse
and gently dry the lens port to avoid water spotting. To clean
use a mild soap solution or lens cleaner.
Do not use alcohol or window cleaner on the Lens Port.
The Lens Port will accept (2) Wide-Angle Adapters. The Wide-
Angle Adapter #9306.80 which is required to mount the Inon
UWL-150AD Bayonet style wide-angle lens. The Wide-Angle
Adapter 9306.81 is required to mount the following Wide-Angle
Lenses, Inon UWL-100, Sea&Sea #58070 and Ep0que DCL-20
screw thread (67mm) style wide-angle lenses.
These lenses can be secured onto the Wide-Angle Adapter
above or below water as they are designed to have water
between the front of the port and the accessory lens. Make sure
no air bubbles are trapped between the port and the accessory
lens. Any vignetting that occurs can be eliminated by zooming
the camera lens slightly. The camera’s built-in flash cannot be
used with wide angle
lenses. The front of the
lenses are so large they
block the camera’s flash.
To properly light subjects
when using a wide angle
lens an external strobe
should be used. Due to
the wide-angle of
coverage of these lenses,
the DS125 Substrobe is
recommended or two
DS51 Substrobes.
10
11
O
Oppttiioonnaall AAcccceessssoorriieess
BBaacckk O
O’’rriinngg
##00110099
O’rings last for several years if properly maintained. (See
maintenance) Always carry a spare.
W
Wiiddee--AAnnggllee AAddaapptteerr
##99330066..8800
Required to mount Inon UWL-150AD Bayonet style wide-angle
lens.
W
Wiiddee--AAnnggllee AAddaapptteerr
##99330066..8811
Required to mount Inon UWL-100 Screw Thread (67mm) style
wide-angle lens.
TTrraayy w
wiitthh RReelleeaassee H
Haannddllee
##99552233..3311
Tray and Release Handle is required to mount external
Substrobes.
wide-angle lens
Wide-Angle Adapter
12
Substrobe
DS51
EV Controller
Ball Socket
Arm
O
Oppttiioonnaall AAcccceessssoorriieess
SSuubbssttrroobbee D
DSS5511 PPaacckkaaggee
##33994444..5544
The Substrobe DS51 package includes
the Substrobe DS51, the EV
Controller and ball socket arms. The
EV Controller provides 10 manual
power settings in 1/2 stop
increments. An external strobe
offers several advantages over using
the camera’s built-in flash. External
strobes move the flash away from
the camera lens which helps reduce
backscatter. They also expand
lighting options to achieve the best
lighting for different subjects. A
second external digital strobe
package can be added to fill the
shadows and produce more realistic
photographs.
The Substrobe DS51 covers the
equivalent of a 28mm lens. It is the
ideal choice when using only the
camera lens or the camera lens with
a macro accessory lens.
If an accessory wide angle lens wider
than 28mm is used, the ideal
lighting choice is the Substrobe
DS125, which covers 100 degrees, or
two Substrobe DS51’s can be used.
N
NO
OTTEE::
Optional Tray and
Release Handle
required to mount
Substrobes.
13
Substrobe
DS125
EV Controller
Ball Socket
Arm
O
Oppttiioonnaall AAcccceessssoorriieess
SSuubbssttrroobbee D
DSS112255 PPaacckkaaggee
##33994444..7777
The Substrobe DS125 package
includes the Substrobe DS125, the EV
Controller, ball socket arm and
charger. The EV Controller provides
10 manual power settings in 1/2 stop
increments. An external strobe offers
several advantages over using the
camera’s built-in flash. External
strobes move the flash away from
the camera lens which helps reduce
backscatter. They also expand
lighting options to achieve the best
lighting for different subjects. A
second external digital strobe
package can be added to fill the
shadows and produce more realistic
photographs.
The Substrobe DS125 covers the
equivalent of a 18mm lens, 100
degrees. It is the ideal choice when
using accessory wide angle lenses
greater than 28mm.
N
NO
OTTEE::
Optional Tray and
Release Handle
required to mount
Substrobes.
