10
BEFORE FIRST USE
To avoid serious injuries, do not use the machine until you have
-
read and understood all instructions.
-
assembled the machine correctly.
-
learned to use the controls (on/off-switch etc).
BEFORE EACH USE
Inspect the machine before each use for damages. Check for
-
alignment of moving parts
-
binding of moving parts
-
broken parts
-
worn or damaged electric cords
-
stable mounting and
-
any other conditions that may affect the way the machine works.
If any part is missing, bent or broken in any way, or any electrical parts do not work properly, turn
the power off and unplug the sander. Replace missing, damaged or failed parts before resuming
operation.
Start the machine and watch it while it runs. If it makes an unfamiliar noise or vibrates a lot, turn it
off and unplug it immediately. Do not restart until finding and correcting the problem.
MAINTENANCE
Disconnect the machine from power source before performing any maintenance operations.
Frequently blow out or vacuum any dust that may accumulate inside the motor.
